9″ x 2.5″ Sediment, Fluoride, Carbon Filter Cartridge Bundle

Name: 9" x 2.5" Sediment, Fluoride, Carbon Filter Cartridge Bundle
SKU: 3894
Availability: InStock

$184.00 – $284.00 AUD

From $31.57 a fortnight with

Installation Service

Clear

Product info

Description

9″ x 2.5” TRIPLE bundle of Sediment and Fluoride and Carbon replacement Filters for Sediment, Chlorine Taste and Odour, VOCs, Cyst and Lead Reduction PLUS the option of adding an Alkaliser filter

A TRIPLE bundle pack with 9″ x 2.5″ (Aqua-Co) Sediment and (Omnipure) Carbon Replacement Filters for Sediment, Chlorine Taste and Odour, VOCs, Cyst and Carbon for Lead Reduction.

Manufacturers recommend replacing the filters every year, however, replacement frequency depends on water quality, usage, and filter capacity.

Stage 1: Aqua Co 100% Polypropylene Triple Gradient Sediment Pre-Filter

Replace every year but dependent on water quality. (6 to 12 Months).
Triple Gradient or Triple Layered means its outer layer captures >10 microns, the middle layer > 5 microns, and the inner layer (core) >1 micron.

This prevents filters blocking prematurely and provides a higher contaminant holding capacity. Instead of dirt building up on the outside, like regular sediment filters, dirt is trapped throughout the whole filter.

Particles >1 micron………..…99.99%

Stage 2: Carbon Filter – Comprised of Coconut Shell Activated Carbon Media

Carbon Filter – Contaminant Reduction

Chlorine……………………………>90%
Chloroform……………………… >99.9%
Copper………………………….… >99.9%
Mercury………………………….…>99.9%
Pesticides……………………… …>97%
Turbidity…………………………… 99%
Oil Products…………………….… 90%
Cyst (Giardia, Cryptosporidium)…>99%

Replace every year 7500 litres or 12 Monthly.

Stage 3: Carbon Filter Manufactured in USA by Omnipure and comprised of Coconut Shell Activated Carbon Media

Carbon Filter – Contaminant Reduction

Particles >1 micron…………… 99.999% (0.4 Micron Nominal Filtration)

Lead………………………….…… >90%+
Chlorine……………………………>90%
Chloroform……………………… >99.9%
Copper………………………….… >99.9%
Mercury………………………….…>99.9%
Pesticides……………………… …>97%
Turbidity…………………………… 99%
Oil Products…………………….… 90%
Cyst (Giardia, Cryptosporidium)…>99%

Maintenance:

Replace every year 7500 litres or 12 Monthly

Stage 4 Alkaliser (Optional)

5-micron, AquaCo Alkalising and Mineralising inline filter that restores the natural alkalinity and essential mineral balance to the water to a level > pH of 8 by adding valuable minerals such as Calcium, Magnesium and Potassium.

Performance has been tested and certified by independent laboratory testing in both Australia & the USA.

Specifications:

Filtration Method: Mechanical, and Adsorptio
Filter Size: 9″ x 2.5″
Filtration Stages: 2
Brand: AquaCo, Omnipure
Operating Temperature: 0.6 °C – 38 °C
Operating Pressure: 25 – 80Psi
Flow rate: 3 LPM
NSF certified: Yes
For Cold water use only. Install on COLD water lines only.
Never install or operate where inlet water pressure may exceed 120 psi (827kPa)
Protect from freezing. Remove filter if temperature drop below 1°C.

Installation Service

Installation is available in Brisbane, Redland City, Logan, Ipswich, Moreton Bay Region, and Gold Coast. $100.00 callout fee applies on top of filter price.